RX-TP5025 High PPFD Urban agricultural plant factory Indoor Vertical shelf plant Growth Lights

Description:RX-TP5025-M Greenhouse horticulture LED Modules, High PPFD Urban agricultural plant factory Indoor Vertical shelf plant Growth Lights, New patent design product with unique lens, Different LED chips in one lens, Concentrating Light efficiently and More uniform spectral radiation, directional light, more efficient comparing with common grow lights. Silicone potting waterproof, more reliable. Suitable for various kinds of plant cultivation and especially for high-density shelf structure Plant Factories , Cupboard Showcase, planting boxes, plant cultivation.

RX-TP5025-M Greenhouse horticulture LED Modules

1. Different LED chips in one lens, Spectral radiation uniform, Lens + Reflector cup, Concentrating radiation, Higher light utilization!
   
2. High PPFD 961µmol/m²/s 3A, distance from plant canopy 0.2m.
   
3. Urban Vertical Agriculture - Horticulture LED Production Module lights.
4. Preferred plant-specific spectra, multiple light-recipe to meet different plant requirements.
   
5. Waterproof IP65.
   
6. Input: AC100~277V PF >0.9 Power: 80W.
   
7. Meet the safety requirements around the world, CE RoHS FCC.

60D Depth distance & Coverage: 

NO1:Different LED chips in one lens, Spectral radiation uniform, 
Lens + Reflector cup, Concentrating radiation, Higher light 
utilization! The preferred spectrum satisfies plant growth 
illumination requirements.
          

NO2:Use 312 1W high-power LED lamp beads to reduce the amount of use, 
improve PPF efficiency, more reliable, longer service life.
          

NO3:Testing report   

It is recommended to use one power supply to 
drive one LED plant light module       

                                                    Recommended power supply model 
                                                    1.ELG-75-42AB Output current 1.8A
                                                    2.ELG-100-42AB Output current 2.28A
      

Parallel connection, one power supply 
     drives 2 LED plant light modules       

                                                    Recommended power supply model 
                 1.ELG-100-42AB Output current 2.28A, Each LED plant light module current 1.14A
                 2.ELG-240-42AB Output current 5.71A, Each LED plant light module current 2.855A.
                   (5.71A current will damage the LED module, please connect two LED modules, 
                    then turn on the power switch)

      

Parallel connection, one power supply 
     drives 2 LED plant light modules       

                                                     Recommended power supply model  
                1.ELG-240-42AB Output current 5.71A, Each LED plant light module current 1.14A.
                  (5.71A current will damage the LED module, please connect 4 modules, then turn 
                    on the power switch)
                2.HLG-320H-42B Output current 7.65A, Each LED plant light module current 1.91A.
                  (7.65A current will damage the LED module, please connect 4 modules, then turn 
                   on the power switch)


      

Electrical installation notes:

Professional knowledge is required to install this product. Please read the specifications carefully before 
installation to understand the electrical parameters.The drive power supply exceeding the rated current and
voltage cannot be used. The maximum drive current of the RX-TP5025-M is shown in Figure 3A. The 
maximum voltage of the driver is 42V.RX-TP5025-M Peak Forward Current 4A, if the drive current exceeds 
3A, be sure to use an additional cooling method to ensure that the TCP temperature does not exceed 70°C, 
pay special attention, more than 3A current drive, causing damage, not covered by the warranty.